
The blurred image of the convertibles without windscreens in the blog post Driverless Cars Pass Selfridges produced some interesting comments. The general consensus seemed to be that the cars were MG Midgets so I posted onto some MG Facebook groups. This produced other interesting musings, which I’ll copy here.
Quite a few wags thought the lack of windscreens was so they could go under low bridges (or had just done so). There was some debate about whether they were Midgets or MGBs with one wag saying they weren’t Midgets they were just far away 😉
Darren Litten bettered that with “All five cars are stunt vehicles on their way to Piccadilly Film Studios (in the building that is now Lillywhite’s) to feature in the 1966 film ‘Please Don’t Burn Our Crapper Down” starring Shorty Nesbit and Tita Lotof. The front one on the top deck is a Ferrari GTO with the roof removed. The other two are a Thunderbird and a Lightning (very, very frightening).I should know, because my dad took the photo. From his hot air balloon…. “
Some people thought they were Rolls Royces or Bentleys. No one agreed but other lone voices also thought they were larger cars and suggested Triumph Heralds or continental convertibles – Alfa 2600 spyder, Ferrari GT and Facel Vega.
Here are a few of the more considered responses from Facebook:
Ian Morral I don’t think the front one is an MGB as there seems to be a swage on the rear arch. The back one looks like a Healey Sprite to me as there’s no chrome strip down the side. The middle one seems wider than the back one so could be an MGB but I’m not sure.
David Peter Broadhurst Looking at the bus on right of picture and the cars being driven plus long women’s coats etc I would say this is 1950s so not MGBs. Rear number plate holder is not normal long oblong shape.
David Peter Broadhurst all the cars on the road are 50s or earlier. Black Ford, A35, 2 Morris Minors (one split screen, so early 50s), Standard 8, Morris Oxford, Lagonda, Austin Taxi(1940s), Guy buses built at Park Royal ( I am reasonably sure)
Alan Dunlop Midgets or Austin Healey Sprites. Perhaps if going to docks they could get more on board stacked higher with the reduced height so cheaper to ship per square yard of space. Here are MGAs lined up at the docks also without screen or soft tops fitted.

Rick Crosby The car on the top rear of the transporter (and probably the others as well) is a 1961-69 Sprite or Midget with the North American spec license plate holder. The top mounted license plate light rules out the MGB, as their plate lights are in the over riders.
Paul Spensley They’re not MG Midgets as the rear filler cap is missing from the right hand side. Looks more like Sunbeam Alpines to me
Alan Witley I think the early ones had body colour filler caps – so possibly not visible?
John Young If you look very carefully the filler caps are there. Possibly substitute caps for transportation? Definitely Sprites or Midgets, 61-69 as someone else has pointed out, and the unique rear wheel arches are the proof.
Andrew Campbell It’s hard to tell the difference between an MGB and a Midget at this distance. BUT the MGB windscreen is much more integral to the bodywork, so I’d put good money on these being midgets.
Phil Harmoneq They are midgets! They have Ace Mercury disc wheel covers. They’re made out of polished aluminium. I think


MK Joy I think these are Spridgets for export (steering wheel bump on the left side). By leaving off the packaway top and windshield, more levels of cars would fit on the ship. Doesn’t explain why they are in London though.
Gary Houfe Ferrari 250 GT as said in comments, looks very similar, deeper boot than a Midget.
Alan Witley Yes, I’m sure midgets. I pity the poor dealers having to fit the windscreens – a real fiddle involving dropping the dashboard!

Mike Authers Similar MkII Sprites at the docks. [No windscreens]
Alan Witley Pretty conclusive. Same shine on the wheels too – but you can see they are the early steel wheels without the hub caps yet fitted.
Dave Lewis Too poor a quality pic to tell, look too big to be either Midgets or Sprites.. but look either like Ferrari 250GT Spiders / California’s with Boranni wire wheels or mid 50’s Facel Vega’s which used similar pattern rear lamps
And of course there were a few comments on the blog itself, including this one:
Rob van der Klugt I’d MG Midgets or Austin Healey Sprites in mind. Mainly because of the flared rear wheel arches. Moreover, I suppose that, because of safety or loading reasons, their simple, flat shaped windscreens will be mounted after the cars’ long voyage overseas. The narrow type number plate holder and the slight bulge at the left of the cars refer to a US-market delivery. But this could be the same story for B’s, of course. The strange part on all cars is the gleaming chrome-effect on the wheels’ lower half. Some embellishers, or wire wheel protection?
I was curious to find a picture of Midgets loaded on a ship, but could not find one. However I did stumble upon this image.

It was tweeted by the MG Car Club with the caption ‘A train load of MG Midgets ready for export at Southampton East Dock.’ This is a much later picture (Rostyle wheels and rubber bumpers, so seventies) but does beg the question, if they are Midgets in my postcard, why are they going through Central London?

They are certainly travelling down Oxford Street heading East so maybe, in the days before the Congestion Charge and the M25, this was the quickest way to London Docks or even Dover. Knowing that they are travelling East also probably discounts the notion that they are not Midgets but imports heading to a West End dealer or further afield.
If anyone has any final thoughts, please leave them in the comments section.
If you want to see more MGs in the collection, see MG postcards.
If you want to see some more unidentified cars see Mystery Cars (though some of these may have been identified by now).
And I’ll leave you with this image, entirely unrelated really but I’m sure you’ll appreciate seeing just how many Austin Healey Sprites can be loaded on a flatbed Commer lorry if you remove the wheels and windscreens and load them on side by side!
(image from the Healey Museum via Pinterest)

Re the final photo… nothing has been removed. This is how BMC got newly-made Sprite unitbodies from Pressed Steel to the car assembly plant at Abingdon.
Good point! Clumsy writing on my part I am afraid. Many thanks, Bob.